Electro Hydraulic Thrusters 125/60.

Electro Hydraulic Thrusters 200/60

Electro Hydraulic Thrusters REH 12/50

Electro Hydraulic Thrusters REH 20/50 

Electro Hydraulic Thrusters REH 32/50

Electro Hydraulic Thrusters REH 50/50

Electro Hydraulic Thrusters REH 80/60

Electro Hydraulic ThrustersREH 125/60

Electro Hydraulic Thrusters REH 125/60

   REH crane solenoids are aggregates that transform the rotational movement of an electric motor into a straight movement of a piston by means of a hydraulic pump.

    Their execution is performed both for operation in temperate climate (N execution) and for humid and dry tropical climate (T execution) operating category 1.

    They are used on the braking devices of the cranes or when adjusting the working parameters for a lifting installation (cranes, cranes, rolling bridges, etc.).

    Technical specifications

Nominal strength: 125 daN;

Nominal stroke: 60 mm;

    Symbolization mode

- REH - Electro-hydraulic lift with YES up to 100%

- 12, 20, 32, 50, 80, 125, 200 or 320 - Nominal force of the size in daN.

- 50, 60 or 120 - Nominal stroke in mm. see table 2 of the Technical Data Sheet.

- N - Normal execution for temperate climate.

- T - Tropical execution category T1.

- 5 - Frequency 50 Hz, voltage 220/380 V.

- 6 - Frequency 60 Hz, voltage 440 V.

- H - No return spring.

- C - With return spring.

- O - Without shock absorber (equipped with ear).

- A - Electro-hydraulic lift equipped with shock absorber (Arc A).

    Constructive variants

Single lever crane REH 12/50

Electro Hydraulic Thrusters REH 20/50

Electro Hydraulic Thrusters REH 32/50

Electro Hydraulic Thrusters REH 50/50

Single lever crane REH 80/60

Electro Hydraulic Thrusters REH 125/60

Electro Hydraulic Thrusters REH 200/60

Electro Hydraulic Thrusters REH 320/60

Electro Hydraulic Thrusters REH 80/120

Electro Hydraulic Thrusters REH 300/120