Carbide milling cutters D 2 mm

Carbide milling cutters D 3 mm

Carbide milling cutters D 4 mm

Carbide milling cutters D 5 mm

Carbide milling cutters D 6 mm

Carbide milling cutters D 8 mm

Carbide milling cutters D 10 mm

Carbide milling cutters D 12 mm

Carbide milling cutters D 14 mm

Carbide milling cutters D 16 mm

Carbide milling cutters D 18 mm

Carbide milling cutters D 20 mm

Brands: Sandvik, Kennametal, TTK, Walter, Iscar, Widia

24 hours delivery from the firm order!

Metal carbide finger mills

Carbide milling for finishing of poorly improved materials HRC 45

Thickness milling carbide for general purpose materials HRC 45

Carbide milling machine for processing hard materials HRC 63

Carbide cutter with cylindrical tail and corner radius for general use HRC 45

Carbide milling for roughing and processing of hard materials HRC 63

Carbide grinding mills for universal applications.

Cylindrical tail mill for aluminum, aluminum alloy, copper, copper alloy, non-ferrous materials and non-metallic materials.

Spherical carbide milling cutter with general purpose HRC 45

Extra long carbide milling cutter for super finishing HRC 65, general purpose.

    Crossover gear for high cutting capacity, on hard or soft materials, for example stainless steel and high strength, welded joints,

    cast iron, hard plastics, etc.

    In quiet operating mode allow to obtain smooth surfaces, minimizing subsequent operations

    produce a short, blunt shampoo that does not cling to clothing and excludes skin injury

    for working with high speed grinders

    Use the same drill sizes for thread diameter as for conventional tarot.

   • For easy adjustment of the thread tolerance, always set a radius correction.

    Start with the RPRG value recorded on the milling cutter. If the tolerance is selected in the Product

    Selector, you will also find the recommendations regarding the correction of the Rprg value.

  • Use a buffer gauge to check the tolerance of the first thread, and then insert -

    if necessary - the necessary corrections. Normally the radius can be corrected 2-3 times up to

    complete wear of the thread drill.

 • In the case of dry processing, it is recommended to use compressed air for removal

    the lighter the shaper.